Maintenance requirements of shot blasting machine




1. Always check whether there are sundries falling into the shot blasting machine, and clean it up in time to prevent the obstruction of each conveying link from forming obstacles to the equipment.

2. Carefully prepare the account records between employees before checking.

3. Carry out secondary inspection of shot blasting machine in each shift, mainly including: guard plates, blades, impellers, rubber curtains, directional sleeves, roller tables and other wearing parts, and replace them in time if problems are found.

4. check the coordination of the electrical components of the shot blasting machine, especially check whether the bolts are loose, and tighten them in time.

5. Regularly check whether the oil filling of each part of the shot blasting machine meets the requirements.

6. The chamber body guard of the shot blasting machine should be checked every day, and if there is damage, it should be replaced immediately.

7. The shot blasting machine should check the cleaning effect at any time. If there is any abnormality, it should be stopped immediately, and the overall inspection of the equipment should be carried out.

8.Before turning on the shot blasting machine, the staff needs to check whether the various switches of the control cabinet of the shot blasting machines are in the required setting positions, and then turn on the machine, so as to avoid misoperation, damage to the electrical and machine setting equipment, and cause equipment setting damage.


Navigation